Attention! I have come up with some another small improvments on the FP's! The 1st ones were made to the same specs as the KUSA revised pins. The origonal flat pins that came in the KP-9/KR-9 were known for OOB issues & they were to long and were piercing primers do to the length and the pointed tip.
You will notice the V1 and V2 pins are shorter than your older flat pins just like the KUSA revised pins that they were using as part of the fix for the recall. That is 100% normal and plays a key roll in HELPING preventing OOB issues. The V-1 pins do NOT guarantee that you wont have an OOB though so keep that in mind!
The Revised KUSA pins and the KD Gunwerx Pins rely on momentum as the hammer strikes it, and as the plunger on the bottom side compresses when in battery to allow the pin to protude out. It will NOT protrude by simply pushing the pin flush with the bolt.
The new design V2 pins does reduce the risk of an OOB more than the V-1 pins. To make make sure it cant fire OOB I recomend choosing the service I provide that re works the bolt if needed and tests the OOB feature. It is a great option for you guys that just dont know what you are doing, or that want the piece of mind that it will not fire OOB. If you or your prefered smith cant install a firing pin, then most definitly send your bolt ino me.
With the V2 pins you will need to discard the spacer between the pin & ONLY use the spring, as you will no longer need it. You will only be re using the spring. V2 pins are ONLY available exclusively though KD Gunwerx. V2's will NOT be sold to any suppliers.
And Now as I keep learning more and more about KUSA's out of spec fuckery & as bolts are being sent in I occationaly see issues with the pin location being off that secures the extractor. If your's is out of spec you will know it because you will moth be able to get a V1 or a V2 pin all the way in. We were able to address that by doing yet another change to the pins so that it can pass through. These are now know as the V-3 Pins. On some occation if the cross pin for the extractor is offset to much you will need to remove it to be able to install the new pin as well.
PLEASE MAKE SURE THAT YOUR SHIPPING ADDRESS IS CORRECT IN YOUR PayPal OR IT WILL SHIP TO WHATEVER ADDRESS YOU HAVE IT SET UP WITH.
Includes:
- 1 V-3 FP (No Instructions) If you cant figure it out how to install it STOP, click back & choose the bolt inspection option.
KP-9 NEW V-3 FP's!
NO Refunds or exchanges at anytime! Every single fireing pin we sell is test fit into a bolt and test fired with a live casing, and then tested for OOB with a live casing before it leaves here. We will not be held responsible if the firing pins dont fit right or still fire OOB in your bolt. KUSA were known for makeing bolts out of spec so that is out of our hands. We are not responsible & will not be held liable for any injuries or death by the use of any of our products. Once products ship it is out of our hands and out of our control. We will not be responsible for lost or stolen parts after they ship! Dont like it pick it up in person or simply dont order. By placing your order you agree to all of these terms!